Mike Perez Guitar

Today is June 14, 2009. I have not done any guitar work for almost two years. Trying to get back to it.

The neck, where it attaches to the body, had some rough spots, so I scraped them down with a razor and brushed on some light, diluted coats....

When I returned, I went to work on the Fangyoti guitar. So now I am back to this guitar. I started with Micro Mesh. It worked nice. I wasn...

It's been a hectic week. No guitar work. Be back on the 8th of October.

OK, I found a brush I had for a while. I thought I'd give it a try. It is a 3/4" Japan brush. I used it with some thinned KTM-9 ...

I allowed a long time for drying, while I worked on The Fangyotee guitar. All was set to go. I was sanding with 1000 grit as recommended. ...

I sanded with 400 grit and then went to 600. 0000 steel wool was better at getting the orange peel off. The areas of sand-through were at ...